AUTONET TV

A Clean Sweep (Fuel Injector Cleaning)

Your vehicle gets its power from burning fuel, usually gasoline, and it counts on something called fuel injectors to send gas to the engine in a spray that is easy to ignite.  It’s a precise operation, and when it’s working well, you have plenty of power and an efficient engine.

But after time, contaminants in the fuel system may prevent the injectors from spraying like they’re supposed to.  They can also shoot contaminants into the engine. 

One sign that could point to dirty fuel injectors is a misfiring engine. Misfires can be caused by several things, so it’s a good idea to bring your vehicle to us so we can trace the cause. Another sign is that your fuel economy has gone downhill or your engine doesn’t have the “pep” it used to.

If we discover that your injectors are clogged or not working the way they should, we can clean them to get rid of those contaminants to restore your engine to its top performance.  When you bring your vehicle to us, we will connect the flushing equipment, flush out the injectors and reassemble the system.

A good time to have fuel injectors inspected is when you bring your vehicle in for routine maintenance.  An oil change is an ideal time to have a technician take a close look at your entire fuel delivery system. 

When you have your fuel injectors cleaned, you may see your mileage go up, your engine performance improve, and your exhaust emissions decrease.

Westmoreland Transmissions
2001 E LOOP 820 S STE 19A
FORT WORTH, TX 76112
817.466.7295
http://www.westmorelandtransmissions.com

Steering You Right (Power Steering Fluid Service)

It’s important for safe driving that two of the most important systems in your vehicle work right.  One is the brakes.  The other is the steering.  Nearly all vehicles on the road have some sort of power steering that allows you to direct a very heavy machine with little effort. 

There are two types, hydraulic and electric.  Many newer vehicles have electric power steering that uses an electric motor to make your steering easier.  But there are many vehicles on the road that use a system that has been around for years.  It uses a power steering pump, a cylinder, several valves, and hydraulic fluid to make it easy for you to turn the wheel. 

If you have hydraulic power steering in your vehicle, it’s important to change your power steering fluid every once in a while.  Over time, the fluid gets contaminated with dirt and other particles.  You might notice your steering is loose, maybe harder to turn and makes a low, straining noise. The first step in determining hydraulic power steering problems is to have your fluid checked.  Its color and smell can give a technician clues to any problems. They will recommend changing it if it has signs of being old, such as the wrong color or smell. 

Because steering is such a vital safety feature in your vehicle, the best strategy is to maintain your power steering according to the vehicle manufacturer’s recommendations.  That means periodically, the fluid should be changed.  That will prolong the life of the other steering systems components, such as hoses, seals, valves, and the power steering pump.  During this service, the technician will replace the fluid, bleed the system and check for leaks.  You’ll be back on the road knowing your vehicle is in top shape to steer you right.

Westmoreland Transmissions
2001 E LOOP 820 S STE 19A
FORT WORTH, TX 76112
817.466.7295
http://www.westmorelandtransmissions.com

Full of Hot Air (Air Conditioning)

In warm weather, you want to be in a cool vehicle. When we're talking cool, we don't mean stylish or trendy, but cool as in not sweltering inside.  And if your vehicle's air conditioner stops working correctly, it seems to always break at the worst time—during a heat wave. 

Automotive air conditioning problems fail for a number of reasons:

• Blower motor not working.  No air comes through the vents, even though the rest of the system could be working fine.
• Refrigerant leak. When the gas that cools the air off escapes from the air conditioning system, your air conditioner can no longer cool off the outside air
• Condenser and compressor. These are parts of your AC system that compress and expand a refrigerant gas to cool off the outside air. They are fairly complex.

When you bring your vehicle into our service center, we'll run a series of diagnostic tests to figure out what isn't working correctly.  The air conditioning system has a lot of parts. There are electrical and mechanical components plus a series of hoses and tubes that all can wear out over time.  Any one of these can fail.

A lot of drivers think they have a "Freon leak" and believe that if they get their AC system recharged with the refrigerant, everything will be fine.  But AC systems are so complex, it usually takes a trained technician to accurately figure out where the problems are.

Sometimes the solution is simple.  If your blower motor wears out or there's a fuse that has blown, the technician can replace the bad parts and you'll quickly be back to enjoying your rolling refrigerator. But when compressors or condensers go bad, those are much more involved and expensive to fix.

For instance, electrical problems can sometimes lead to acid to build up and corrode other parts of your AC system.  Sometimes that causes so much damage, your whole air conditioning system has to be replaced. That's why it's always a good idea to have your AC regularly maintained.  Our technicians can find a problem early and prevent more expensive repairs down the road. That's really the cool way to go.

Westmoreland Transmissions
2001 E LOOP 820 S STE 19A
FORT WORTH, TX 76112
817.466.7295
http://www.westmorelandtransmissions.com

In a Fog (Fogged Windows in Cold Weather)

It's bad enough in cold weather when ice and snow block your visibility.  Add to that fog on the inside of your windows and you could be driving blind.  So here are a few tips on how to keep your windows from fogging up when there's a chill in the air.

You probably know fog is really condensation, when moist, warm air meets a cold surface and turns to liquid.  If your windshield fogs up, you probably turn on your windshield defroster. Most defrosters blow heated air on the windshield glass to warm it up so it won't condense the moisture.  Many also turn on the air conditioning to reduce the moisture. 

That same strategy can work on the rest of the windows.  First, turn up your heater's temperature setting.  The hotter the air, the more moisture it will hold.  Also, turn off the "recirculating" setting since you want all outside air to come in. Then switch on the air conditioning.  It will remove the moisture from the outside  air that it's blowing inside the cabin.  Try cracking a couple of windows to make it easier for the air to flow. This should do the trick pretty quickly. 

There's one other thing to try.  Many vehicles have electric heater elements embedded in the rear window glass (the rear window defroster) and in the outside rearview mirror glass. Make sure to turn those on, too; sometimes they're on the same switch.

For all of these things to work, of course, your vehicle's components have to be maintained so they'll do the things they're designed to do.  And you didn't think it was important to have your air conditioning working in the cold weather months! 

One final tip.  Keep the insides of your windows CLEAN.  Oil and dirt on the glass give the water molecules something to latch on to.  That ought to clear up this problem.

Westmoreland Transmissions
2001 E LOOP 820 S STE 19A
FORT WORTH, TX 76112
817.466.7295
http://www.westmorelandtransmissions.com

Upsizing Wheels and Tires With Westmoreland Transmissions

Many FORT WORTH drivers want to accessorize their vehicle - you know, make it theirs. One of the easiest ways to get a custom look is to get some new wheels. There are thousands of wheel designs at FORT WORTH area tire shops to get you the look you want. And for many FORT WORTH drivers, that look includes bigger wheels. It used to be that cars came from the factory with 15 or 16 inch wheels. Now 16, 17 and even 18 inchers are standard. And the factories are offering optional wheel packages up to 20 inches or more.

So let's talk about what to consider when you want to upsize your wheels. It's not exactly a DIY project, so you need to know a thing or two before you get started. The most important term to know is rolling diameter. The rolling diameter is simply the overall height of your tire. Unless you want to modify your vehicle suspension, you'll want to keep your rolling diameter the same when you upsize your wheels.

Let's think about those three golden doughnuts in front of you. They're all about the same size. So if we pretend they're tires, they would have the same rolling diameter. The doughnut hole is the size of the wheel. Now pretend we've made the hole bigger on some. That's like having a bigger wheel - but the rolling diameter is the same.

It's important to keep the rolling diameter the same for several reasons. First of all, if the tire is bigger, it might not fit in the vehicle wheel well. Next the speedometer, odometer and anti-lock brake system are all calibrated for the factory rolling diameter. In order for your anti-lock brakes to work properly, the rolling diameter must stay within 3% of the factory recommendation. If you ignore that, you run the risk that your anti-lock brakes won't work properly.

Some have vehicles with electronically-controlled suspension that will be negatively affected by changing the rolling diameter. Let's think about the doughnuts again. You see, as the size of the wheel gets bigger, the sidewall gets shorter. The tire holds less air, so the sidewalls are made stiffer to compensate.

Low profile tires from top manufacturers use special compounds that give the sidewall the strength it needs without compromising ride quality. As you increase your wheel size, you'll typically get a slightly wider tire. This means that you have a larger contact patch. The contact patch is part of the tire that contacts the road. Because there's more rubber on the road, the vehicle will handle better. And braking distances will be shorter. A lot of FORT WORTH folks with trucks or SUVs love the extra control.

TX drivers need to watch out that the contact patch isn't so big that the tires rub in turns or over bumps. What we're talking about here is fitment. Your tire professional at Westmoreland Transmissions can help you get this right. He'll install your new wheels, add spacers if needed to make sure your brakes fit inside your new wheels and get you rolling.

Also, if you drive off-road in TX a lot, you may need a higher profile tire to protect your new rims. And make sure your new tires have the load rating you need if you tow a trailer or haul heavy loads. Again, your tire professional at Westmoreland Transmissions knows how to help.

And don't forget about tire pressure. If you have larger rims, your new tires will hold less air and they'll need to run a slightly higher pressure. Forget that and you'll wear your tires out fast. Finally, get an alignment at Westmoreland Transmissions after you get your new shoes. 

Stop by Westmoreland Transmissions to learn more about how you might upsize your wheels or tires.

You'll find us at:

Westmoreland Transmissions
2001 E LOOP 820 S STE 19A
FORT WORTH, TX 76112
817.466.7295
http://www.westmorelandtransmissions.com