AUTONET TV

Read a Good Tire Lately? (Tire Wear)

There's lots of good information to read in books and online.  You might not know that you can also "read" your tires and learn a lot about what shape they're in and if they are in need of attention. It's important to know how your tires are doing because a tire failure can be very dangerous to you, your passengers and others on the road near you.

You read your tire by looking at the surface that rides on the road, where the tread is.  Check out the outer and inner edges.  If you notice there's more wear on the inner or outer edge than on the rest of the tread, your vehicle could be out of alignment.  Wear on an inner or outer edge could mean your wheels are leaning too much to one side.  When you see this, visit our service center soon to have the alignment checked.

What about if both edges are worn? That could be a sign that you don't have enough air in that tire.  In an underinflated tire, the middle is not contacting the road surface as much as the edges, so the edges wear down first.  It could also mean that you're taking corners too aggressively or your tires haven't been rotated on a regular schedule.

Another thing you might see on your tires' tread area is wear in the center of the tire.  That means you likely have too much air in that tire.  Too much air makes your tire contact the road in the middle more than on the edges so the middle wears down prematurely. 

You might also see some smooth spots on the tread in irregular spots. This is called cupping. This is sometimes caused by suspension problems. A technician can examine your suspension to see if it is up to the manufacturer's specifications.

Finally, you may spot tires that are worn unevenly in a pattern that goes diagonal to the tread pattern.  This could mean your tires are out of balance, something our service center can check. They might also check alignment at the same time.

Your tires are the only part of your vehicle that contacts the road surface.  That means your acceleration, traction, steering and braking are all dependent on your tires being healthy. Maintain your tires by having one of our trained technicians read the clues and making sure they're always in roadworthy shape. 

Westmoreland Transmissions
2001 E LOOP 820 S STE 19A
FORT WORTH, TX 76112
817.466.7295
http://www.westmorelandtransmissions.com

PCV Valve: What Is It?

Most FORT WORTH drivers know something about preventive maintenance on a vehicle. We know we should routinely replace the oil and wiper blades and other fluids. But have you heard of a PCV valve ? This little car part needs to be replaced regularly or it can cause some serious problems in your vehicle engine.

PCV stands for Positive Crankcase Ventilation. The crankcase holds your motor oil and is located at the bottom of your engine.

When fuel is burned in your engine, it produces waste gases that are mostly vented out through your exhaust system. But some of these gases push their way past the pistons and into the crankcase. There, these gases can mix with motor oil to produce oil sludge, which can damage vehicle engine parts through corrosion and by clogging engine passages. FORT WORTH vehicle owners should be advised that if the engine is running at high speeds, these gases can also cause pressure inside the crankcase to build up. This pressure, in turn, can blow gaskets and damage seals, leading to oil leaks.

The waste gases that leave the engine are comprised of about 70% unburned fuel. They used to be vented off the crankcase into the atmosphere. But starting in 1964, laws mandated that these gases be recaptured. Manufacturers began installing PCV systems, which recycled the gases into the air intake system where they could be mixed with fuel and sent to the engine to be burned.

The PCV valve is a one-way valve attached to the crankcase. Waste gases exit the crankcase through the valve but cannot enter.

Over time, the waste gases leave deposits on the PCV valve that can gum it up. So it needs to be replaced occasionally. This is an inexpensive part of preventive maintenance that is often overlooked, but which can have very expensive consequences. It's good auto advice to keep this little valve clean and working well.

In order to maintain efficient circulation, the PCV system also has a breather tube that allows clean air to enter the crankcase. This air is usually filtered through the engine air filter. But some vehicles have a separate air filter for the breather tube called the breather element. If this is the case with your vehicle, proper maintenance of the PCV will include replacing this element. To find out whether your vehicle has this type of PCV system, check your owner's manual or ask your service advisor at Westmoreland Transmissions.

The PCV system reduces harmful vehicle emissions. The maintenance it requires is simple and inexpensive at Westmoreland Transmissions. A fouled or damaged PCV system can lead to serious engine damage for FORT WORTH drivers.

Let's all learn to practice good car care. It's good for our wallets, and it's good for our TX environment.

Westmoreland Transmissions
2001 E LOOP 820 S STE 19A
FORT WORTH, TX 76112
817.466.7295
http://www.westmorelandtransmissions.com

Muffler: Victim of Winter (Muffler Repair)

So you almost got through the winter until, one day, your muffler started sounding like a dragster, loud and obnoxious.  It's not surprising.  All that road salt and brine can cause rust to punch holes in a muffler, and that should raise a big, red warning flag about the safety of your vehicle.

One big concern is carbon monoxide, a poisonous gas that can drift into your cabin if your muffler is leaking. You've probably heard about people whose home furnaces have leaked carbon monoxide and overcome families inside.  Carbon monoxide can first cause you to feel dizzy and nauseous.  It can even render you  unconscious—even kill you.  So if your vehicle's muffler is leaking that gas, well, it's nothing to mess around with.

Oh, and how about that noise? You may get a ticket since many municipalities have laws against noisy exhausts. 

Your muffler may be making a clunking or rattling sound when the engine's running or it may be spewing thick exhaust smoke.  All of these symptoms are telling you to get to your vehicle service facility soon.  A technician may find it's the muffler or another part of your exhaust system that is coming apart or is busted. 

Sometimes the repair can be as simple as replacing a section of pipe or clamps, but sometimes you'll need to replace more components.  Your service advisor can recommend several different options to try to help you meet your performance and budgetary needs. 

You'll drive out with a vehicle that doesn't sound like a teenager trying to hotrod the family car, is a whole lot safer and sounds a lot less obnoxious in the process.

Westmoreland Transmissions
2001 E LOOP 820 S STE 19A
FORT WORTH, TX 76112
817.466.7295
http://www.westmorelandtransmissions.com

Rear Window?Not the Movie! (Why Some Rear Windows Don't Go All the Way Down)

Alfred Hitchcock once made a mystery thriller film called "Rear Window." It had nothing to do with the rear window of today's cars, SUVs, CUVs and light trucks.  But there is one thing that some drivers DO find mysterious.  Why don't the rear windows in the second row of many of these vehicles go down all the way?

You've probably seen or owned one or two. That rear side window only goes down about a third, a half or three-quarters of the way. Yet there are some similar vehicles where the window goes down all the way.  What gives?

There was the rumor going around that the restriction on how far those windows could go down was a child safety feature.  The thought was that if those windows couldn't open up fully, a child (or pet) would be less likely to fall out.  But it turns out the real reason is that the way the rear doors were designed, there was just no room for the window to go down all the way into.

Many vehicles are configured so that the rear wheel arch continues into the rear door.  That arch restricts the space that would accommodate the window, so they had to stop the window somewhere higher than bottom of the door.

Seems buyers would prefer those back windows to go all the way down, so many manufacturers are changing designs to make that happen.  Longer vehicles can have their wheels pushed further back so the wheel arch isn't an issue.  Some have altered the position of the rear window track. 

If you have any questions about your rear side windows, you may want to consult your service advisor to check yours.  If they ARE supposed to go all the way down and they're not, it could be due to a few problems: corrosion, broken or bent window regulator components, electrical issues, etc. But if they're not supposed to go down all the way?  At least now you know for sure.

Westmoreland Transmissions
2001 E LOOP 820 S STE 19A
FORT WORTH, TX 76112
817.466.7295
http://www.westmorelandtransmissions.com